A-100 miniature beauty case with black finish.

• built-in A-100 miniature power supply/bus board with higher output current (200 mA @ +/-12V and 50 mA @ +5V) 
• useable width: 32 HP (e.g. four modules with 8 HP), new since September 2008, the former version had only 28 HP available
• 4 bus connectors (i.e. max. 4 modules)
• raw wood version may be varnished by the customer in any desired color (e.g. with a color spray can, see red example)
• outside measures: about 180 width x 155 height x 125 depth
• max. module depth in the left area: about 55 mm (because of the heat sinks of the power supply), the width of the area with the reduced depth is about 60 mm 
• max. module depth in the right area: about 85 mm, the width of the area with the non-reduced depth is about 100 mm

* pay attention to the suitable module widths if you order the modules, e.g. A-112, A-113, A-126 or A-199 (because of the spring reverb tank) cannot be mounted into the A-100MC

the handles on top of the cases are enclosed but not mounted, two holes with about 3 mm diameter have to be drilled to mount the handle, if the miniatures cases have to be stacked on top of each other the handles have to be omitted

external transformer with 9V AC voltage output and 500mA (or more) is required, attention: DC power supplies are not suitable !

* 9V AC adapter is included